Burkert MS08, Operating Instructions Manual

Page: 47 / 84

Type MS08
Sensor - Maintenance
47
11 SENSOR - MAINTENANCE
Go to device SAC254 Sensor > function Sensor > tab Maintenance .
Detailed view Maintenance
Setting
Simulation Status Start or stop the simulation mode and enter simulated data.
Start measurement Wizard to manually start a measurement.
Calibration Wizard to calibrate the zero value (base intensity).
Restore previous cal-
ibration Wizard to restore the previous calibration.
Calibration schedule Plan the calibrations.
Interval in days Set the regular interval.
Last calibration Read the date of the last calibration.
Next calibration Read the date of the next planned calibration.
Advanced Service mode Activate or deactivate the service mode.
Tab. 28: Settings in the “Sensor” configuration area, maintenance detailed view
The menu items are detailed in the following chapters:
▪ Simulation , refer to chapter Stop the simulation mode [
}
47] and Start the simulation mode [
}
47] .
▪
Start measurement , refer to chapter Manually start a measurement [
}
48] .
▪ Calibration , refer to chapter Calibrate the zero value (base intensity) [
}
48] .
▪ Restore previous calibration , refer to chapter Restore the previous calibration [
}
49] .
▪ Calibration schedule , refer to chapter Plan the calibrations [ } 50] .
▪ Advanced , refer to chapter Activate or deactivate the service mode [
}
50] .
11.1 Stop the simulation mode
Go to device SAC254 Sensor > function Sensor > tab Maintenance .
Select Simulation > Status > Off .
As soon as the parameter Simulation > Status is set to Off , the following actions are carried out:
▪ The product measures again.
▪ The product status indicator is green.
▪ For the meaning of the signal of the device status LED, refer to chapter Product status indicator [ } 14] .
11.2 Start the simulation mode
In simulation mode, you can enter simulated data for the following measure values and simulate the beha-
viour of the sensor:
▪
SAC : Spectral absorption 254 nm
▪ Turb 530 :Turbidity 530 nm
▪ CODeq : Chemical oxygen demand
▪
BODeq : Biochemical oxygen demand