Burkert Flowave 8098, Operating Instructions Manual

Page: 257 / 354

257
SAW sensor – Maintenance
Type 8098 FLOWave L
17 SAW SENSOR – MAINTENANCE
17.1 User levels of the editable menu items
Menu item of the SAW sensor – Maintenance menu Minimum user level
Device information basic user
Flow direction Installer
Calibration Installer
Device verification Installer
Simulation Installer
17.2 Default settings
You can find the default settings of the device in the CANopen supplement for the Type 8098 FLOWave L at
country.burkert.com .
→
Before making any change in the settings, use the Bürkert Communicator software to print a pdf file with
all the default settings of the device.
17.3 Reading out some device information
17.3.1 Reading out the ordering codes of the device, the transmitter
board and the measurement board
To read out the ordering codes of the device, the transmitter board and the measurement board, do the
following:
→
Go to the CONFIGURATION view.
→
SAW sensor
→
Confirm to access the Parameter view.
→
Go to the MAINTENANCE view.
→
Device information
→
ID numbers
→
Go back to the parent menu.
English