12
ChangesconcerningbüS/CANopendesign
DIP1 DIP2 DIP3 DIP4 DIP5 DIP6 Description of the display modes of the device status LED (Top LED)
X
X
X
X
0
0
8681 “Classic Mode”
:
the colour combinations for the position and error feedback are set using DIP
switches 1 to 4 as described in the
Basic Operating Instructions, chapter
“Setting colour combinations”
– see also chapter “5.2.1”
1
1
1
1
1
0
Factory settings: software-configurable display mode:
display mode of the device status LED can be selected by firmware:
- Device-specific LED mode (8681 Classic 0 ... 15) – see chapter “5.2.1”
- NAMUR mode – see chapter “5.2.2”
- Valve mode – see chapter “5.2.3”
- Valve mode + errors – see chapter “5.2.4”
- Valve mode + warnings (factory setting)
- Fixed colour – see chapter “5.2.6”
- (Top) LED off (there is no feedback via Top LED)
(In the Bürkert Communicator the display modes can be found under:
General settings -> Parameters -> Status LED -> Mode)
PLEASE NOTE:
Hardware-configured values (that means: set via DIP switches) overwrite the
software-configured display mode!
1
1
0
0
1
0
NAMUR mode:
The device status is displayed according to NAMUR NE 107 – see chapter
“5.2.2”
1
0
1
1
1
0
Valve mode:
Display of the position feedback – see chapter “5.2.3”
1
1
0
1
1
0
Valve mode + errors:
Display of the position and error feedback – see chapter “5.2.4”
1
1
1
0
1
0
Valve mode + warnings:
Display of the position and error feedback as well as warnings – see chapter
“5.2.5”
X
X
X
X
X
X all other combinations: (Top) LED off
Tab. 1:
Colour combinations / colour coding / display modes for Type 8681büS/CANopen
english
Type 8681 büS/CANopen
Summary of Contents for 8681
Page 59: ...59 english Type 8681 büS CANopen ...
Page 60: ...www burkert com ...
