15
ADDING THE PLUS-X VSWR TO THE ARCTURUS OR ARC PLUS
Installation Note: Even though you may operate the Arcturus or ARC Plus system and Plus-X VSWR on different subnets,
Burk Technology strongly recommends installing the Plus-X VSWR on the same LAN as the Arcturus or ARC Plus. If
communications between separate networks fail, an Arcturus or ARC Plus can only continue to monitor and control a
Plus-X device on the same LAN. If the network link between the units is not available, Arcturus or ARC Plus macros and
alarm monitoring will be unavailable for the Plus-X VSWR.
To use the Plus-X VSWR as part of an Arcturus or ARC Plus remote monitoring and control system, you will need to
add the Plus-X VSWR to the system using Autoload Plus software.
1.
Complete steps in
to establish PC communications with your Plus-X VSWR
Unit(s).
2.
Download the latest AutoLoad Plus software from the Burk Website.
3.
Open the AutoLoad Plus software. You will see a screen like the one below.
4.
Enter in the User Name, Password and IP/Host name for your Arcturus or ARC Plus system. The default
screen will look the screen shown below. Click
Local Site
in the top left of the window.
