3. Quick Installation Guide:
Buckle of module is on the
left hand side bar
Tighten the screws with a hex wrench
on the back
4. Install Drum and Cymbals
Install the drum, adjust the direction of the drum so that the audio
interface on the drum faces away from us, and use a double-ended
wrench to lock the anti-lock nut at the bottom of the drum in the
opposite direction; install the cymbals in sequence and adjust the
direction of the cymbals, the audio interface of the film faces us, put
on a round cotton sleeve, a steel washer, and screw on the claw nut
(no need to tighten too much, so as to avoid triggering the resonance
effect of the cymbal and the stand).
