Burg BKG82A+, User Manual

Page: 39 / 128

EN
38
BEFORE USING THE APPLIANCE
Installing and operating your fridge
Before starting to use your fridge, you should pay attention to
the following points:
• Operating voltage for your fridge is 220-240 V at 50Hz.
• The plug must be accessible after installation.
• There can be an odor when you first switch on the appliance.
It will disappear after the appliance starts to cool.
• Before making the connection to the power supply, ensure
that the voltage on the nameplate corresponds to the
voltage of electrical system in your home.
• Insert the plug into a socket with an efficient ground
connection. If the socket has no ground contact or the
plug does not match, we suggest you to call an authorized
electrician for assistance.
• The appliance must be connected with a properly installed
fused socket. Power supply (AC) and voltage at the
operating point must with the details on the name plate of
the appliance (name plate is located on the inside left of the
appliance).
• We do not take responsibility for damages that occur due to
ungrounded usage.
• Place your fridge in a place that it would not be exposed to
direct sunlight.
• Your fridge should never be used outdoors or left under the
rain.
• Your appliance should be at least 50 cm away from stoves,
Gas ovens and heater cores, and should be at least 5 cm
away from electrical ovens.
• When your fridge is placed next to a deep freezer, there
should be at least 2 cm between them to prevent humidity
on the outer surface.
• Do not place heavy items on the appliance.
• Clean the appliance thoroughly, especially in the interior,
before use (See Cleaning and Maintenance).
• Installation procedure into the kitchen unit is given in the
The installation procedure into the kitchen unit is given in
the Installation Manual. This product is intended to be used
in proper kitchen units only.