Burg BKF30, Operating And Installation Instructions, Page: 28 / 73

· Prior to installation, ensure that the local distribution contitions and the adjustment
of the appliance are compatible .
· The laws, ordinances, directives and standards in force in the country of use are to
be followed (safety regulations, proper recycling in accordance with the regulations,
etc.).
Locating your built-in hob
After removing the packaging material from the appliance and its accessories,
ensure that the hob damaged. If you suspect any damage do not use the appliance
and contact the store where you purchased this hob.
· This built-in hob is to be inserted into a cut out of a worktop. It will be electrically
connected with the switch box below counter level, especially provided for this
purpose.
Installation and operation - in comformity with these instructions - according to the
Appliances Safety Law and The Applicable Regulations in force in the area the hob is
to be installed.
INSTALLATION
3
6
The electrical connection of this hob should be carried out by an
authorised service personnel or a qualifed electirician, according to
the instructions in this guide and in compliance with the current
regulations.
· If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified person in order to avoid an electrical
hazard.