Kurzanleitung /
Quick installation guide
SNC-6202
Version 1.2sfi/0213/dt-engl/A5
QUICK INSTALLATION GUIDE
IP camera SNC-6202 and SNC-6212IR
To operate the IP dome camera, please follow these steps:
1. Install the camera in the desired location.
2. Connect the camera to power using PoE (PoE switch or PoE injector required) or
12 V DC / 24 V AC.
3. Insert the CD (included in the delivery) into your PC/laptop and install the IP-finder.
4. The IP-finder displays an IP address for the camera. Double-click on the IP address and the
Internet Explorer comes up automatically.
In case this doesn’t work, you may also enter the IP
address (as shown by the IP-finder) manually into the Internet Explorer. Using the IP-finder,
another IP address can be assigned to the camera, if required.
Note:
The camera comes with a default IP address:
Default IP address:
192.168.1.168 (or by DHCP, if available)
User name:
admin
Pass word:
9999
Please refer to the user manual for further installation information and on camera configurations.
Subject to technical changes. Errors excepted.
No.
Connector
Pin
Definition
1
RJ-45
-
10/100 Mbps Ethernet / PoE
2
Power
24 V AC
1
24 V AC
2
24 V AC
12 V DC
3
12 V DC (-), GND
4
12 V DC (+)
3
BNC
-
Analogue video-output
4
Alarm & Audio I/O
1
Alarm In (
–)
2
Alarm In (+)
3
Alarm Out (
–)
4
Alarm Out (+)
5
Audio Out (R)
6
Audio Out (L)
7
Audio GND
8
Audio In (R)
9
Audio In (L)
5
Micro SD card slot
-
For video recording storage
6
Reset button
-
Press your finger on the reset
button for approx. 15 sec. to
restore the camera to factory
settings.
Note on power connection:
When connecting power, please
note that the connection pins on
the 4-pin plug are separate for
12 V DC and 24 V DC.
Improper power connection
may lead to camera damages
and to invalidation of warranty!
6
5
4
3
2
1
