ProfiScale LOCATE 7320
2
EXTRA
+
9V
+
Introduction
The ProfiScale LOCATE S is an advanced multifunc-tional detector. It can
detect metal and alternating current and localise current passage and the
location of breaks in cables. It can also be used to test light bulbs and fuses
and can determine polarity. Use the LOCATE S multifunctional detector to
minimise the risk of causing damage to live cables, metal pipes and objects
when drilling.
Illustration
Metal sensor
LED lamp
Selector switch
Sensitivity regulator
Switch for the light
AC detection area
Metal plates
Battery cover
Safety instructions
Failure to observe the following instructions may result
in personal injury:
1. Before using the device, you must read these instructions carefully to
ensure that you operate the device safely. Keep these instructions in a
safe place.
2. Shielded or live cables in metal cladding, metal walls or thick walls
cannot be detected. In this case, you can use the metal detection mode
to take readings.
3. Proceed with caution when hammering nails, cutting or drilling into
walls, ceilings or floors containing cables or pipes close to the surface.
4. The device’s detection capability may vary due to the humidity of the
material, composition of the wall, its coating and the size of the object to
be detected. This can lead to a reduction in detection depth.
5. Do not use the device to find cables whose voltage lies outside the
specified voltage range.
6. Before using the device, check that it is working properly.
7. If you obtain unclear readings, you should,
if possible, choose another location to drill,
screw etc. If in doubt, seek expert advice.
8. Keep the device away from children and unauthorized persons.
9. For safety reasons and to maintain the warranty
on the device, repairs to the measuring device must only be carried out
by qualified personnel using genuine parts.
10. Never expose the device to an electric voltage,
as this could damage the electronics.
11. Do not use the device in the vicinity of inflammable or explosive gases.
12. Do not use the device if it is defective.
13. Handle the device with care and do not drop it.
14. To avoid functional errors, do not dismantle
the device.
15. Keep the device clean and dry.
16. When not in use, the device should be stored in the bag supplied.
17. Avoid contact with water and dust.
18. Do not use abrasive cleaners or solvents to clean the device. Use a damp
cloth and mild detergent.
19. Check the battery/batteries regularly to prevent damage.
20. Remove the battery if you are not going to use
the device for a long period.