LOCATE PS 7320
ProfiScale LOCATE S
Detector multifuncional
en
Operating instructions
LOCATE S
30 mm
Test
www.hardwaresolutions.co.uk
Page 1: ...LOCATE PS 7320 ProfiScale LOCATE S Detector multifuncional en Operating instructions LOCATE S 30mm 30mm Test www hardwaresolutions co uk ...
Page 2: ...ary due to the humidity of the material composition of the wall its coating and the size of the object to be detected This can lead to a reduction in detection depth 5 Do not use the device to find cables whose voltage lies outside the specified voltage range 6 Before using the device check that it is working properly 7 If you obtain unclear readings you should if possible choose another location ...
Page 3: ...ensor 2 Set the selector switch to I and slowly turn the sensitivity regulator until the LED lamp stops flashing The device is now set to the highest sensitivity 3 Place the metal sensor on the wall and move it slowly and steadily across the area of the wall you want to check The LED lamp will start to flash and the buzzer will sound if a metal object is located 4 To pinpoint the exact location of...
Page 4: ...ive side of the fuse with one finger on your free hand while at the same time ensuring that the other conductive side of the fuse touches the raised metal button If the LED lamp and the buzzer activate the fuse is working properly Testing light bulbs The method used to test fuses can also be used to test light bulbs If the LED lamp and the buzzer issue a signal the light bulb is working properly D...
