Burg Wächter Contact 2031, Assembly And User Manuals

Page: 10 / 60

CONTACT 2031 10 | English
3. Scan the QR code, printed on this
accessory.
4. The APP will auto recognize this accessory
and add it to your list. Rename it
perspicuous name, which says you the
exact location of the sensor in case of
alarm, e.g. “Front door“.
Pairing sensor with Base
5. Test Alarm function e.g. by triggering
an SOS alarm.
Coming Home / Leaving Home
alarm delay:
If this function/these functions are activated
in the app, then an alarm will only be
triggered after a pre-defi ned time.
The length of time can be set individually
for each sensor in the app under “Device
Management”
-> Advanced Settings >
“More” > “Coming Home delay”/
“Leaving Home delay”.
The alarm can thus be armed/disarmed
in the house using the keypad, for example,
when entering/leaving the living area.
Home Scenario support
Sensors which are deactivated in “Home
Scenario” do not trigger an alarm when a
window is opened, for example. Sensors
which are still armed remain active.
Ready to arm
If this function is activated, then a user who
wants to arm the system via the app receives
a warning if not all BURGprotect CONTACT
sensors are connected. Through active
confi rmation of the warning message, the
system can also be armed with active sensors
as required.
Coming Home / Leaving
Home alarm delay
1. Start App.
2. Expand menu “Dashboard“
–>
“Add Accessory“ –>“Scan QR Code“