26 | English
Noise 2162
Noise 2162
English | 27
26 | English
Noise 2162
Technical details
Type of battery
2x CR123A
Alternative permanent
power supply
=5V DC MicroUSB, 1A
Volume
Up to 90 dB
Air humidity
measurement range
0 % ~ 99 % ± 10 %
Temperature
measurement range
-10°C – 40°C ± 2°C
Max. range inside
< 20 m*
Frequency band
2.4 GHz
Supported radio
standards
IEEE 802.11b/g/n
Max. output
<10 mW (10 dBm)
Working temperature
range
0°C – 40°C
Air humidity
20 % – 85 %
Weight
150 g
Dimensions (H x W x D)
56 x 56 x 68 mm
Installation instructions
1. Check the strength of the Wi-Fi signal at the
site of installation with your smartphone.
The reception quality should be at least two
graduation marks to be able to guarantee
an alarm.
2. First remove the battery strap from the
siren.
3. Set up the sensor in the app before
installation and test the function.
4. Fasten the Noise 2162 with adhesive tape if
the surface allows a secure hold. Otherwise,
use the enclosed screws and dowels to fix
the detector in the desired position. Use
a 4 mm drill bit for the hole. Mark the
drilling depth on the drill, e.g. with a pen
or adhesive tape. Before drilling, check
whether there is a risk of hitting water, gas
or electricity lines, for instance.
5. Avoid installation on metallic surfaces
and near live cables, as these may impair
the function.
Note:
If you have aluminium or metal
frames/doors, test whether the function
works reliably at the desired position before
mounting.
6. Mount the Noise 2162 in the desired
position.
*
The actual range depends on the circumstances on site.