secuENTRY
English
|
41
Delete submenu
• Switch on the keypad using the key
• Then press FUNC – “Menu/Code Change” appears
• Scroll using the 2 key until the Administrator menu appears
• Confirm your selection using
• Scroll with the 2 key until “Delete Admin. setting” appears
• Confirm your selection using
• Enter the administrator code in order to acquire the authorisation for
programming
• Scroll to the identification medium that you want to delete and
confirm 2x using
• I”Data deleted” appears in the display
Time Functions submenu
(Premium only)
This is intended for setting the time and date
Setting the time:
Not available as a standard function.
Setting the date:
Not available as a standard function.
Setup submenu
General system settings
Register
After a replacement of the cylinder or the keypad, the two units have to be
newly aligned, so that they can resume communication.
Attention! Before
registering a keypad, the ENTRY cylinder must be awakened. This is
done by opening the lock once with a transponder. Then you have
1min time for the login process.
Registration of a keypad
• Activate the keypad using the key
• Then press
FUNC
, ‚Menu / Code Change‘ is displayed
• Scroll using the 1 or 2 key till reaching the ‚Administrator menu‘
• Confirm with
• Scroll using the 1 or 2 key until reaching the “Setup“ menu item
• Confirm with
• Enter the admin code of the unit to be registered
• “Data has been saved” is displayed after a successful registration
Attention! Make sure that no other powered secuENTRY unit is
placed within a direct reach of the device when registering a new
keypad or a new cylinder, as such unit could be mistakenly addressed
instead of the intended one. When in doubt, disconnect such units
from power before the registration (remove batteries).
Summary of Contents for secuENTRY
Page 27: ...secuENTRY Deutsch 29 ...
