S-SERIES REDI RACK™
Page of
©2015 Burco, Inc.
Step 5:
Once all of the fasteners are in place and finger tight, use
a 9/16” box end wrench to tighten the fasteners to approximately
30 lb.-ft. Once all eight of the bolts are tightened down, the Redi
Rack is ready to be installed onto the mounting surface.
DISCLAIMER:
IN NO EVENT, REGARDLESS OF CAUSE, SHALL BURCO INC.® BE LIABLE FOR ANY
INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND,
WHETHER ARISING UNDER BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT
LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
