•
IMPORTANT: If the supply cord is damaged, it must be replaced by the manufacturer, service
agent or similar qualified person to avoid a hazard. The supply cord may become warm when
the appliance is in use.
•
WARNING: This appliance must be earthed.
Personal Safety
•
WARNING: Extreme caution must be used when moving this appliance as it is very heavy.
•
WARNING: External surfaces of this appliance may become very hot whilst in operation. Use
caution when touching these surfaces.
•
Always turn the appliance off, allow to cool down and unplug before adjusting, moving or
cleaning.
Mains Cord
•
The mains lead should reach from the socket to the appliance without straining the
connections.
•
Do not let the cord hang over the edge of the table or the counter and keep it away from any
hot surfaces.
•
Do not place the appliance where the mains lead could fall into a sink
.
3. Other Safety Considerations
•
Do not use this appliance if it has malfunctioned or has been damaged in any way.
•
Do not dismantle any part of the appliance. Responsibility cannot be accepted if this
instruction has been ignored.
•
To protect against fire, electric shock and personal injury do not immerse cord, plug or
appliance in water or any other liquid when cleaning and do not allow any water or liquid to
come into contact with any of the electrical connections or controls.
•
The use of attachments or tools not recommended or sold by Burco may cause fire, electric
shock or injury.
•
If the mains lead is damaged it should be replaced by a qualified technician.
•
Unplug from the mains outlet when not in use and before cleaning.
•
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of this appliance by a person responsible for
their safety.
•
Maintenance other than cleaning should be performed by the manufacturer whilst this product
is within guarantee (contact service help line) or otherwise by a qualified service engineer.
•
This appliance is not suitable for installations in an area where a water jet can be used.
•
This appliance must not be cleaned by a water jet.
•
This appliance is only to be installed in locations where its use and maintenance is restricted
to trained personnel.
•
For correct operation this appliance should be operated in an ambient temperature between
22-28 Degrees Celsius.
4. Operation
The operation of this appliance should only be carried out by personnel that have been instructed in
the operation of the appliance.
Connect the plug to the socket. The green indicator will flash on, which indicates that power has been
supplied to the unit. Rotate the thermostat knob clockwise. Set the temperature at your desired
