Setting the time of day
Touch & hold the centre (function) icon for
a few seconds until the ● symbol between
the numbers on the LED display flashes.
While the ● symbol is flashing, you can
adjust the time of day by touching the
plus & minus icons. Please note: the hours
& minutes adjust quickly.
Important - once the time of day has
been set, allow approximately 30 seconds
before using any of the other programmer
functions. This ensures that the time of
day will remain correct.
Setting an alarm tone
Touch & hold the plus & minus icons
simultaneously until the ● symbol flashes
& you hear a beep - then touch the centre
(function) icon.
Touch the minus icon to select the tone.
You can change the tone by repeatedly
touching the minus icon - there are three
tones to choose from.
Setting the minute minder
To set the minute minder, touch & hold the
centre (function) icon until the bell symbol
appears & begins to flash. Important - the
flashing will last for approximately five
seconds, so any setting must be carried
out within this time frame.
Touch the plus & minus icons to set the
length of time required. Once this has
been done, the minute minder is set.
When the desired length of time has
counted down, the alarm will sound. To
cancel the tone, touch & hold any of the
icons.
To cancel the minute minder at any time,
touch & hold the plus & minus icons
together.
Semi-automatic cooking
Method 1 - duration (switch off after
set time period):
Touch & hold the centre (function) icon;
the bell will flash & you will hear a beep.
Touch the centre (function) icon again
- this will skip past the minute minder
function.
The display will flash the word ‘dur’ & the
‘A’ will flash on the left hand of the display.
Use the plus & minus icons to set the
length of time you want to cook for. The
flashing will last for approximately five
seconds, so the setting must be done
within this time frame or the time of day
will show again.
Once the duration has been set, the oven
will automatically switch off. When the set
time has elapsed the alarm will sound. To
switch the alarm off, touch any icon.
To view any remaining time, touch & hold
the centre (function) icon & touch again.
To cancel the semi-automatic programme
at any time, touch the plus & minus icons
together.
Method 2 - end time (switch off at a
set end time):
Touch & hold the centre (function) icon;
the bell will flash & you will hear a beep.
Touch the centre (function) icon again
- twice - this will skip past the minute
minder & duration functions.
The display will flash the word ‘End’ & the
‘A’ will flash on the left hand of the display.
USING THE CLOCK/PROGRAMMER-ELEC(
if
fitted
)
