FOR INFORMATION TEL: 514.337.4415 FAX: 514.337.4029
2
INSTRUCTIONS:
(applicable to your electrical primary pump)
This fine pump that you have just purchased is designed from the latest
in material and workmanship.
Before installation and operation, we recommend the following procedures
CHECK WITH YOUR LOCAL ELECTRICAL AND PLUMBING CODES TO
ENSURE YOU COMPLY WITH THE REGULATIONS. THESE CODES HAVE
BEEN DESIGNED WITH YOUR SAFETY IN MIND. BE SURE YOU COMPLY
WITH THEM.
WE RECOMMEND THAT A SEPARATE CIRCUIT BE LEAD FROM THE HOME
ELECTRICAL DISTRIBUTION PANEL PROPERLY PROTECTED WITH A
FUSE OR A CIRCUIT BREAKER. WE ALSO RECOMMEND THAT A GROUND
FAULT CIRCUIT BE USED. CONSULT A LICENSED ELECTRICIAN FOR ALL
WIRING.
DURING THE INSTALLATION STEPS, MAKE SURE THAT THE
BASEMENT IS FREE OF MOISTURE OR ANY FLUID OR WATER.
BATTERY ACID IS CORROSIVE. AVOID SPILLING ON SKIN OR CLOTHING.
EYE PROTECTION MUST BE WORN WHEN HANDLING THE BATTERY.
A
B
C
D
WARNING
This pump must only de used to pump clear water. This pump is not designed to handle
effluent, salt water or brine. The pump should not be used to pump any chemicals fluids.
Pump damage may occur if used in these applications and will void warranty.
