Buoyant WM12, Installation Manual

Page: 2 / 19

TOOLS FOR INSTALLATION
Electric Drill
Level Allen Keys
Screw Driver
SAFETY INFORMATION
1) All parts should be installed according to the instructions provided in this installatiion guide. Failure to follow
these instructions may result in deformities and /or loose cables and connectors. If such issues occur remove
all bottles immidiately until any issues found have been properly corrected. Pass this installtion guide unto any new
buyer of this product if resold to any party.
2) Buoyant products should only be installed and rearranged by qualified proffessionals after reading and fully
understanding these instructions wholly. DO NOT TRY TO INSTALL THE BUOYANT CABLE WINE SYSTEM YOURSELF! A
qualifIied professional should alsways be involved in jobsite inspection, product selection, assembly and installation
of Buoyant Cable Wine Systems products.
3) Local codes regarding building, fire, sanitation and seismic requirements should may apply to some installations
of the Buoyant Cable Wine System. The owner or purchaser of the system is responsible for checking with local
building authorities and ensure that installation is in compliance with such codes and requirements if any exist.
4) Products from other manufactures must not be combined Buoyant Cable Wine System with any products.
5) If any Buoyant Cable Wine System parts are damaged or in anyway compromised contact a Buoyant Cable Wine
System sales representative. NEVER USE ANY DAMAGED OR COMPROMISED PARTS!
6) The Buoyant Cable Wine System is designed to support the weight and shape of standard wine bottles. Use caution
when storing other than standard wine bottles.
7) The design of Buoyant Cable Wine System only supports the weight of standard wine bottles (750ml). Do not exeed
the maximum load of the Buoyant Cable Wine System as this may compromise the integrity of the Cable Wine
System.
8) Never let any parts or bottles protrude into an aisle or doorways as this may cause accidental contact with the
Buoyant Cable Wine System.
9) Always provide safe access to all levels of the Buoyant Cable Wine System in compliance with any building or fire
code that may apply locally.
10) Never let anyone stand, walk, climb, lean or pull on the Buoyant Cable Wine System.
11) Never let anyone change, alter or modify the Buoyant Cable Wine System or any of its parts as this may cause the
Buoyant Cable Wine System and/or its parts to be unsafe.
12) Always keep the wooden rods in a dry environment as humidity and moist can cause the wood to expand and
change the dimensions of the drilled holes in the rods. Also, when staining the wooden rods it is important to avoid
getting stain inside the holes as this could cause the hole dimensions to change Buoyant Cable Wine System. Any
work done unto the wooden rods to repair such dimensional changes may effect the integity
of the system.
Plumb-Line
Cutter
2
HEX Key: 1.5mm (0.059” )
HEX Key: 2.5mm (0.098” )