Bunton 642300, Parts & Maintenance Manual

Page: 4 / 68

TABLE OF CONTENTS
2
TEXTRON TURF CARE AND SPECIALTY PRODUCTS
Engine Components . . . . . . . . . . . . .Figure-5 . . . . . . . . .34
Operator Platform . . . . . . . . . . . . . . . .Figure-6 . . . . . . . . .36
Steering Mechanism . . . . . . . . . . . . . .Figure-7 . . . . . . . . .38
Deck Drive System . . . . . . . . . . . . . . .Figure-8 . . . . . . . . .40
Body . . . . . . . . . . . . . . . . . . . . . . . . . .Figure-9 . . . . . . . . .42
Hood Hinge and Air Cleaner Ass’y . . .Figure-10 . . . . . . . .44
Cutting Deck . . . . . . . . . . . . . . . . . . . .Figure-11 . . . . . . . .46
Idler Assembly and Belt Guards . . . . .Figure-12 . . . . . . . .48
Deck Lift Mechanism . . . . . . . . . . . . .Figure-13 . . . . . . . .50 Fuel System . . . . . . . . . . . . . . . . . . . .Figure-14 . . . . . . . .52
Hydrostatic Pump . . . . . . . . . . . . . . . .Figure-15 . . . . . . . .54
Spindle . . . . . . . . . . . . . . . . . . . . . . . .Figure-16 . . . . . . . .56
Brake Assembly . . . . . . . . . . . . . . . . .Figure-17 . . . . . . . .56
Wheel Motor . . . . . . . . . . . . . . . . . . . .Figure-18 . . . . . . . .57
Electrical Wiring Harness . . . . . . . . . .Figure-19 . . . . . . . .58
Wiring Harness . . . . . . . . . . . . . . . . . .Figure-20 . . . . . . . .60
Index
1.0 PRE-DELIVERY CHECKLIST__________________________________________________
Product No.__ BZT 3310 Zero Turn Riding Mower ____
Power Unit
Check;
❑
Wheel lug torque:
__ Drive Wheel Lug Bolt 100-120 ft. lb. (135-162 Nm)
__ Drive Wheel Hub Nut 40-50 ft. lb. (54-68 Nm)
❑
Tire Pressure should be:
__ Front 20-25 psi (110-138 kPa)
__ Rear 9-11 psi (55-69 kPa)
❑
Parking brake adjustment
❑
Hydro Linkage neutral centering adjustment
(unit must not creep in neutral)
❑
Reverse speed adjustment
❑
Steering lever adjustments
Engine
Check;
❑
Engine oil level
❑
Engine coolant level
❑
Air cleaner element and connections
❑
Fan belt adjustments
Hydraulic System
Check;
❑
Hydraulic oil level
❑
Pinched or rubbing hoses
❑
Twisted or crimped hoses
❑
Oil Leaks
❑
Hydro tow valve is in “Drive” position - Both pumps
Serial No._____________________________________
Electrical System
Check;
Interlock switch function
__ Parking brake switch
__ Implement control PTO switch
__ Control Lever neutral lock
__ Seat switch
❑
Dash panel gauges and warning lights
❑
Pinched or rubbing wires
Cutting Units
Check;
❑
Adjust cutting height to customer’s specifications
❑
Blade mounting bolt torque
__ 75-85 ft. lb. (102 Nm)
❑
Front deck adjustment
Miscellaneous
Check;
❑
Look for loose or missing hardware
❑
All lubrication points
❑
Examine paint finish; touch up where necessary
❑
Check decals; In correct position and legible
❑
Make sure all owner’s manuals are in document tube
❑
__________________________________________
❑
__________________________________________
❑
__________________________________________
Should you encounter any areas that require repair during set-up, please explain below and fax a copy of the checklist
and the problem description to us.
Problem Description ___________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Distributor ____________________________________
Customer ____________________________________
Inspected by __________________________________
Date_________________________________________