background image

Welcome to Phase Brew!  

You’re about to start brewing better coffee in a whole new way! The BUNN Phase Brew 

with Heat & Release Technology is different from any coffee maker you’ve used before. 

Unlike typical drip machines, BUNN Phase Brew doesn’t ‘drip’ right away. In fact, it doesn’t 

drip at all – it flows.
Phase Brew heats all the water to the right brewing temperature, then quickly  

releases it through our unique sprayhead for an optimal 4-minute brewing phase and 

amazing coffee flavor in just 10 minutes!

the

 

6

-

minute

 

heating

 

phase

*

When you fill the brew funnel with coffee grounds, the top tank with 

water, and press the On/Off button, coffee won’t flow into the carafe 

right away – even though the 6-minute heating phase has begun.

What you’ll hear:

 

After a few minutes, you’ll hear some bubbling 

and rumbling sounds, which are perfectly normal. It’s the sound of 

our Cyclonic Heating System

 bringing the water to about 200°F – 

the right temperature to brew without bitterness.

What you’ll see:

 

As you look at the control panel, you’ll see  

“Heating Water” and a moving ‘racetrack’. This tells you you’re in  

the heating phase.

the

 

release

When all the water reaches the optimal brewing temperature, it’s 

released from the top tank to our unique sprayhead – beginning the 

optimal 4-minute brewing phase.

What you’ll hear:

 

During the release, you’ll hear a ‘whoosh’ of 

water to our unique sprayhead.

What you’ll see:

 

As water is released to the sprayhead, the top 

tank empties and the heating element creates steam. Most of the 

steam is channeled back into the brew funnel, but some escapes 

through the top of the brewer.

the

 

4

-

minute

 

brewing

 

phase

Following the 6-minute heating phase and release, the 4-minute 

brewing phase begins!

What you’ll see:

 

Rich coffee leaving the brew funnel and flowing 

into the carafe.

What you’ll smell:

 

Amazing coffee aroma!

*Length of heating phase is affected by the temperature of water  

poured into the brewer and the room’s temperature.

THE BUNN PHASE BREW EXPERIENCE

10 MINUTES TO PERFECT COFFEE!

Summary of Contents for PHASE BREW











Reviews: