STEP 2
STEP 3
STEP 1
Clean all exterior surfaces
using a damp cloth rinsed
in any mild, nonabrasive,
liquid detergent.
STEP 5
Remove the hopper lid from
the hopper.
STEP 4
Remove the funnel with fil-
ter and discard any remain-
ing coffee grounds.
STEP 6
STEP 7
Remove the hoppers by
sliding all the way forward.
39480 101206
MHG GRINDER
USE & CARE INSTRUCTIONS
Clean and sanitize the hop-
pers and lids. Care should
be taken not to scratch the
hoppers with any abrasive
material.
Replace the hoppers and
fill with fresh whole bean
coffee. Replace the hopper
lids.
Empty all beans from
hopper(s). Plug in the grind-
er, place funnel with filter
into funnel rails. Press and
release the
GRIND
button.
Run a few cycles until all
coffee in the grind chamber
is dispensed and disconnect
the grinder from the power
source.
CLEANING
NOTE:
Bunn-O-Matic recom-
mends the 3 step method for
cleaning and sanitizing the
server. The 3 step method
consists of hot soapy water
using an approved deter-
gent, a fresh water rinse,
and an aqueous sanitizing
solution using an approved
non-chlorine
sanitizer.
