5
McDonald’s
®
Axiom
®
Quick Start Guide
Bunn-O-Matic Corporation
www.bunn.com
READY TO BREW
WATER TEMP: 200
˚
BREW
WARMER
REAR
FRONT
WARMERS
ENABLE BREW
AXIOM
®
I
O
READY TO BREW
WATER TEMP: 200
˚
BREW
WARMER
REAR
FRONT
WARMERS
ENABLE BREW
AXIOM
®
I
O
3. Ensure
Sprayhead and
Brew Basket are in place
and put a measuring
container under the
Brew Basket.
1. Enter
Level 1
Programming by
pressing the
Right
hidden button until
BrewWIZARD screen
appears.
Prior to Programming the machine or Brewing any coffee a Flow Rate Calibration must be done. Flow rates will vary from
machine, location to location, even from one end of a building to another.
CALIBRATING FLOW RATE
NOTE: This test is used
to capture water from
the
Sprayhead during a
pre-determined 60 second
dispense valve cycle.
READY TO BREW
WATER TEMP: 200
˚
BREW
WARMER
REAR
FRONT
WARMERS
ENABLE BREW
AXIOM
®
I
O
READY TO BREW
WATER TEMP: 200
˚
6. To start the 60 second
dispense test, press the
Brew button.
5. Screen asks if
Container is Ready?
Select
Yes.
CONTAINER READY?
CALIBRATE FLOW?
QUIT YES
NO YES
READY TO BREW
WATER TEMP: 200
˚
BREW
WARMER
REAR
FRONT
WARMERS
ENABLE BREW
AXIOM
®
I
O
CALIBRATE SPRAY
PRESS BREW START
8. Note the water level.
9. Once all the water drips
out, use the (-) or (+)
buttons to input the
volume of water.
NOTE: It is very important to
be accurate when performing
this test because it will control
the pot level during normal
operation.
READY TO BREW
WATER TEMP: 200
˚
BREW
WARMER
REAR
FRONT
WARMERS
ENABLE BREW
AXIOM
®
I
O
ENTER OZ 24.5
(-) DONE (+)
10. When complete, select
Done.
READY TO BREW
WATER TEMP: 200
˚
BREW
WARMER
REAR
FRONT
WARMERS
ENABLE BREW
AXIOM
®
I
O
ENTER OZ 24.5
(-) DONE (+)
READY TO BREW
WATER TEMP: 200
˚
BREW
WARMER
REAR
FRONT
WARMERS
ENABLE BREW
AXIOM
®
I
O
5. Select
Yes.
CALIBRATE FLOW?
NO YES
2. Continue pressing the
Right hidden button
until
Calibrate Flow
screen appears.
READY TO BREW
WATER TEMP: 200
˚
BREW
WARMER
REAR
FRONT
WARMERS
ENABLE BREW
AXIOM
®
I
O
BrewWIZARD
