Bunn HC-1 Operating & Service Manual Download Page 2

2

INTRODUCTION

This equipment dispenses hot powdered beverages on demand.  It has one, two, or three hoppers.  The two

and three hopper models may also dispense cold powdered beverages from their left dispense station.  It is for
indoor use only on a sturdy counter or shelf.

BUNN-O-MATIC COMMERCIAL WARRANTY

Bunn-O-Matic Corp. (“Bunn”) warrants the equipment manufactured by it to be commercially free from

defects in material and workmanship existing at the time of manufacture and appearing within one year from the
date of installation.  This warranty does not apply to any equipment, component or part that was not manufac-
tured by Bunn or that, in Bunn’s judgement, has been affected by misuse, neglect, alteration, improper installa-
tion or operation, improper maintenance or repair, damage or casualty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR

ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
  The agents, dealers or employees of Bunn are not
authorized to make modifications to this warranty or to make additional warranties that are binding on Bunn.
Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not
be relied upon.

The Buyer shall give Bunn prompt notice of any claim to be made under this warranty by telephone at (217)

529-6601 or by writing to Post Office Box 3227, Springfield, Illinois, 62708-3227.  If requested by Bunn, the
Buyer shall ship the defective equipment prepaid to an authorized Bunn service location.  If Bunn determines, in
its sole discretion, that the equipment does not conform to the warranty, Bunn shall repair the equipment with no
charge for parts during the one year warranty period and no charge for labor by a Bunn Authorized Service
Representative during the one year warranty period.  If Bunn determines that repair is not feasible, Bunn shall, at
its sole option, replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE

SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AS
SPECIFIED HEREIN, TO REPAIR OR, AT BUNN’S SOLE OPTION, REPLACEMENT OR REFUND.
  Bunn shall not be
liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment,
claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or ser-
vices, or any other special, incidental or consequential damages.

USER NOTICES

Carefully read and follow all notices on the equipment and in this manual.  They were written for your protec-

tion. All notices are to be kept in good condition.  Replace any unreadable or damaged labels.

11646.0000

26530 060500

Summary of Contents for HC-1







Reviews: