background image

8

NUMBER NAME 

NUMBER 

NAME

 

Regular 

15 

Jamaica Blue Mtn

 2 

Decaf 

16 

Guatemalan

 

Colombian 

17 

Light Roast

 

Colombia Supremo 

18 

Dark Roast

 

Costa Rican 

19 

Espresso

 6 

Ethiopian 

20 

Amaretto

 7 

Kona 

21 

Hazelnut

 

Kenya AA 

22 

French Vanilla

 

Sumatran 

23 

Irish Creme

 

10 

French Roast 

24 

Vanilla Nut

 

11 

Italian Roast 

25 

Caramel

 

12 

Mocha Java 

26 

Raspberry

 

13 

House Blend 

27 

Almond

 

14 

Breakfast Blend 

28 

Dark Mtn Roast

COFFEE CHART

Entering a coffee name using a RECIPE CARD.

1.  Press the STOP button and place the chip portion of the card under the sensor coil on the front of the 

grinder.

2.  After a short pause, the display will show 3 “dashes”.

3.  Remove the card and press any batch switch on the side to be programmed.

4.  The display should show the number of the coffee name loaded into the grinder.

5.  The grinder display will then return to the normal operating mode.

NOTE: If a number is chosen from the chart below, and entered into the grinder, check to be sure the number 

entered represents the name of the coffee on the chart.

1.  Grind into the funnel then insert the funnel into the brewer funnel rails.

2.  The display will read the coffee name that was ground into the funnel.

3.  If this name is different from the name on the chart, the grinder’s memory needs to be reset.

Resetting the grinder memory (to match the chart below)

1.  Unplug grinder from the outlet.

2.  Press in and hold both the STOP and the GRIND buttons and plug cordset into the outlet. After a short pause, 

the display will show a series of 3 dashes followed by a series of 9 dashes.

3.  When the 9 dashes appear, release the STOP and GRIND buttons, then press and release the STOP button.

4.  The display will count down then return to the normal operating mode. The grinder should now be set to 

match the coffee names with the numbers on the chart below.

33736  072310

SELECTING COFFEE NAMES (Continued)

Summary of Contents for G9-2T DB










Reviews: