background image

Page 6

SKU 96105

for technical questions, please call 1-800-444-3353.

Turn “ON” the power switch-see Figure 2.

operation

The Camera Switch Box will automatically switch between camera images.  Each 
image will be monitored according to the amount of time selected.  

Select

Mode

Bypass

Channel 

selections

Figure 3

Press the SELECT button to choose either AUTO mode or any channel; CH1, CH2, 
CH3, CH4.  Either one, two, three or all four channels may be chosen.  Press Select 
as each LCD lights up next to the AUTO function or channel.

Selecting AUTO mode will switch consecutively between each of the four channels 
for the amount of time you have selected (see TIME switch instructions #5 below).

Selecting BYPASS mode allows you to skip any channel in the viewing cycle.  Press 
the SELECT button to illuminate the LED for the desired channel.  Press the MODE 
button (see Figure 3) to illuminate the BYPASS LED.  Press SELECT again to enter 
the AUTO mode.  You may bypass up to three channels at a time.

To reinstate channels and have them as part of the viewing cycle, press the SE-
LECT  button  to  select  the  channel.    Press  MODE  to  reset  the  channel  into  the 
AUTO cycle. 

To select the amount of time for each Camera in the cycle, move the TIME switch on 
the side panel to the desired setting.  There are four settings for TIME; 3 seconds, 
10 seconds, 20 seconds and 30 seconds.

The Camera Switch Box has a support stand located on the bottom.  To set the 
Camera Switch Box up at an angle, pull out the support stand and use it to support 
the Camera Switch Box.

5.

1.

2.

3.

4.

5.

6.

Power 

Switch

Time Switch

Volume Control

Summary of Contents for 96105








Reviews: