Page 3
For technical questions, please call 1-888-866-5797.
Item 62447
8.
Use eye protection.
Wear ANSI-
approved impact safety goggles
when setting up this product.
9.
Maintain products with care.
Keep the
Alert System clean for better and safer
performance. Inspect the components
periodically. If damaged, have it
repaired by a qualified technician.
10.
Do not overreach.
Keep proper footing
and balance at all times. If a ladder
is to be used during installation, it
should be supported by an assistant.
11.
Do not set up the Alert System
if under the influence of alcohol
or drugs.
Read warning labels on
prescriptions to determine if your
judgement or reflexes are impaired
while taking drugs. If there is any
doubt, do not set up the Light.
12.
Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of
the power tool is maintained.
13. The warnings, precautions, and
instructions discussed in this instruction
manual cannot cover all possible
conditions and situations that may
occur. It must be understood by the
operator that common sense and
caution are factors which cannot
be built into this product, but must
be supplied by the operator.
SAVE THESE INSTRUCTIONS.
