3
4
3. Installing the handlebar: install the handle bar and stem subject to the
bicycle models
（1）First, install the head set and put the T-shaped handle bar and stem into
the head tube, there is a safety line on the stem, please make sure the line
always under the head tube. Finally, adjust the height and direction, tighten
the screws on the head set clamp, or tighten the top fixing screw.
（2) Using a hexwrench, unscrew and take off the 4 fixing screws on the stem (like
picture 1), then put the handlebar in a proper position and adjust its angle.
Finally close the front fixing cover and tighten the 4 screws (please fix the
two diagonal screw first then tighten, this tip in very important for fixing the
handle bar's angle) (like picture 2)
4. Installing the saddle: install the saddle subject to bicycle models
-----------
--------------------------
------------------------------
-----------
-----------
------------------
(Picture 1)
(Picture 2)
