Charging LED
19
18
Before Use
Names and functions of each part
Power button
Press for approximately 3 seconds to turn
the device on. This button can also be used
to manually lock the screen.
Volume buttons
For adjusting the volume of operation
sounds, videos and music
fi
les.
microSD card slot
Used to load digital camera images, PDF
fi
les, Microsoft O
ffi
ce documents, etc.
Compatible cards:
microSD (SDHC/SDXC/UHS-1) (Max to 64GB is supported)
Micro USB 2.0 connector
For connecting computers, etc., with a micro USB connection cable and
with an AC adapter for charging.
Front camera
Takes the user’s face in video
chat, etc.
Rear camera
Takes photos and videos.
Flash
Use to illuminate when taking photos or recording videos in dark places.
Stereo headphone connection port
A mini plug type stereo connection port with a 3.5 mm diameter for con-
necting headphones, headsets, etc.
Built-in microphone
Allows voice recognition operation,
video chat and so on.
Built-in speaker (Stereo)
Built into the left and right of the
main unit and outputs stereo sound.
Wi-Fi/Bluetooth
Can be used in both Wi-Fi
communication and Blue-
tooth communication.
GPS
For use when con
fi
rming
positional information
with the GPS location
service.
NFC
(supports Google Wallet)
Uses the Android beam
function to enable devices
to send and receive data
to each other. Enables the
usage history, etc., of non-
contact IC cards to be read.
Checking accessories
Before use, please check the accessories when you check the main unit.
- Micro USB (2.0) cable - Quick Start Guide (This document) - Case Stand
Charging
- At the time of purchase, this device’s built-in
battery is not sufficiently charged. Make sure to
charge it before use.
- No power adaptor is supplied with this device.
Please use the one commercially available.
Power adaptor speci
fi
cation:
AC-USB, 5V, 2A (100-240V)
- While this device is charging, the charging LED of the power button will illuminate
orange.
- When charging using a power adaptor, it will take approximately 9 hours to fully charge.
It takes longer to charge this device from a PC via connection with the USB cable.
- We recommend turning the LCD display o
ff
during charging as not doing so could
prevent this device from su
ffi
ciently charging or cause it to take a long time to
charge.
- Once fully charged, the power button charging LED will illuminate green.
Connect this device to a PC or power adaptor using the accompanying micro USB
cable.
* If a hand is covering the antenna,
quality may be a
ff
ected.
■ Antenna position
Front camera light
Illuminance sensor