Getting Started:
Connect the USB charging cable to the Micro USB charging port. Connect the opposite end
to your power source and allow the speaker to fully charge before use. The Red
charging Indicator LED will turn on when the battery is charging. When fully charged
the LED will turn off. Press the power button to turn the speaker on. The Bumpboxx
screen logo will flash while waiting to be paired with a Bluetooth device or Micro
SD card to be inserted.
Connecting to Bluetooth:
On your Bluetooth enabled device search for and connect to the device named “Bumpboxx”.
The screen logo will stop flashing once the Bluetooth is connected.
Connect Two speakers with TWS pairing:
1.
Turn on both speakers at the same time and the logo screens will begin to flash.
2.
Press the power button
quickly
on one speaker and you will hear a beep. The logo screen on the
opposite speaker will stop flashing to indicate that the 2 speakers are now connected.
3.
Follow the steps above to pair only one speaker to the Bluetooth device named “Bumpboxx”.
4.
Once paired both logo screens will stay lit and the speakers are ready to play together.
Playing MP3 Files From a Micro SD Card:
Insert a Micro SD card into the slot to play music. The Bumpboxx logo will turn white once a Micro SD
card is inserted. Music files must be MP3 format. Remove the Micro SD card to allow Bluetooth
streaming. *Note: The Micro SD card capacity cannot exceed 32MB.
Answering Phone Calls:
When receiving an incoming phone call the speaker will play an audio alert. To answer the call press
the Answer Call/End Call button. The microphone is located on the top of the speaker. To end the call
press the Answer Call/End Call button.
