MY22XXX - XX_1.0_14.06.2022
142
Operation
6.5.15.16
Adjusting the vibration feedback
The vibration feedback can be adjusted.
1
Open the SETTINGS MENU.
2
Open <My Bike><Vibration feedback>.
3
– Select
ON
if you wish every press of a button
and every active message to produce vibration
feedback.
– Select
OFF
if you do not wish vibration
feedback to be produced.
– Select
ONLY
WITH MESSAGES
if you wish
vibration feedback to be produced for
messages only.
The selected vibration feedback is produced.
6.5.15.17
Adjusting the charge mode
Charge mode and long-life mode can be adjusted.
The faster the battery is charged, the shorter its
life cycle will be. It can shorten the battery’s
service life by up to 50%.
1
Open the SETTINGS MENU.
2
Open <Charge>.
3
– Select <Normal> if you wish the battery to be
charged at a normal rate.
– Select <Fast> if you wish the battery to be
charged at a fast rate.
– Select <Charge to Storage> if you wish to
store the battery for an extended period of
time.
– Select <LONG LIFE> if you wish to extend
the battery’s life cycle considerably. The
battery capacity is reduced as a result.
The selected charge mode is implemented.
6.5.15.18
Resetting all tour data
All values in the TOUR MAIN MENU and SUB-
MENU can be reset.
• Trip
• Time
• Trip Height
• Cons.
• MAX
• AVG.
1
Open the SETTINGS MENU.
2
Open <Reset values><Trip Reset>
3
Follow the instructions on the display.
All tour data are reset.
6.5.15.19
Resetting to factory settings
The system settings can be reset to their factory
settings.
1
Open the SETTINGS MENU.
2
Open <Reset values>< Factory Reset>.
3
Follow the instructions on the display.
All settings are reset to the factory settings.
6.5.15.20
Displaying error messages
1
Open the SETTINGS MENU.
2
Open <Messages>.
The list of current error messages is shown.
6.5.15.21
Displaying the software version
1
Open the SETTINGS MENU.
2
Open <About>.
The software versions for the individual
components will be shown.
