5. Now screw the threaded pin (a) with the short side instead of the Spax screws (F) into the hole. First
push the washer (d) and then the toothed lock washer (b) over the threaded pin (a) and tighten
everything with the cap nut (c).
6. Proceed the same way at the oder side.
7. Unscrew the 4 screws (h) from the transport protection. Now remove the transport protection by lifting the
element slightly and pull the transport protection away over the feet towards the front (towards you).
0920 PIROU
© 2 0 2 0
K U R T B E I E R & K A T I Q U I N G E R
d
b
a
c
h=2x
h=2x
h=2x
