Delivery condition: already synchronised
December 2017
B
C
A
1. Press pairing buttons
A
at receiver 2 x until the LED
indicates. The pairing process is active for about 10 seconds.
2. Press simultaneous button
B
and
C
at remote cont-
rol until the green LED starts to flash. The flashing confir-
mes a successful pairing process.
Note:
For the pairing prozess the distance between transmitter
and receiver should be less than 2 metres.
Motorised back function - Programming of transmitter and receiver
The programming is completed, the transmitter is now ready for operation. If the motor doesn´t start while pressing,
release the button and press again. If necessary retry the process.
Transmitter
Brief instruction, Pairing-Method:
Should a new start-up of remote control be necessary the wireless communication with the
control/motor must be established. Proceed as follows:
Receiver
LED
Put drive systems into operation successively,
don`t
operate several systems simultaneous. Otherwise the
remote control cannot be assigned clearly by control/motor.
0 8 2 0 N A O S
© 2 0 2 0
K U R T B E I E R & K A T I Q U I N G E R