11
Take a Video (Manual)
Turn on the BIKER PRO by pressing the Power button.
Press the recording button to start a video recording. The red
LED will blink while the video is recording. Press the recording
button again to stop recording.
Playback On Your Computer
Power off the BIKER PRO! Connect with your computer via
USB cable from the USB port, then turn on the device! The
camera will be recognized automatically as USB Device. Or
you can take out the micro SD card and use your own card
reader to connect with your computer too.
The device must be power on while connected with
computer for data download.
Do not remove the USB cable under "Mass Storage"
status! Please switch off the camera before
removing the USB cable!
On a MAC
Simply plug the BIKER PRO into your MAC via USB cable,
turn ON the BIKER PRO, and the MAC OS will recognize the
BIKER PRO as an external hard drive.
Important Tip For MAC Users
When deleting files from your MicroSD cards you must empty
the trash before removing it or unplugging the BIKER PRO. If
you do not empty your trash the photos and videos files will not
be completely erased from your cards.
