Bullet RPZ1600, Owner'S Manual, Page: 10 / 18

CHARGING
Your scooter comes charged out of the carton. We still recommend charging the unit
for 6-8 hours prior to its first use. We also recommend charging your scooter after
each use and prior to storage.
Warning: Do not allow scooter to go into deep discharge, as this will damage the
batteries.
RIDING
1. Make sure that all of the exposed bolts and screws are tightened.
2. Raise the kickstand to its upright position.
3. Push the on/off switch (located on the handlebar) to the ON position.
1. Make sure unit is turned off.
2. Open the charging socket
cover located on the right
side of the scooter frame,
under the footplate.
3. Locate your Battery Charger.
Find the charger socket and plug it into the
scooter.
4. Next, plug the AC into a wall outlet
When first plugged in the charger has one red light
that will illuminate at the same time, indicating that
the charging process has started. Once the light on the
charger turns red &green, you may remove the
charger and close the safety cap.