2
While gently pushing
handle down, slide
Safety Lock over and
down to the unlock
position, then lift
handle.
Place product on table.
Bring handle down until
blade touches material.
Push handle down until
material is completely cut.
If needed, extend handle.
3
USING YOUR SHEAR
1
FLOORING CUT GUIDE
Max Thickness = 1” or 25mm
Material List
Laminate Flooring
Engineered Wood
Commercial Vinyl
Luxury Vinyl Tile
Parquet
PVC Tile
Rubber Tile
Soft Plastic
SIDING CUT GUIDE
Max Thickness = 1” or 25mm
Material List
Siding, Fiber Cement Board
Siding, Pressboard Lap
Siding, Vinyl
Siding, Wood
Trim, OSB
Trim, Fiber Cement
Trim, Vinyl
Shingles, Tar or Wood
Your Magnum Shear cuts a wide variety of products. Please refer to cut guide for recommended products and thicknesses.
Please note: Approved materials may vary in density and hardness. If extreme pressure is
required to cut a product, it may result in damage to your machine. Please contact Bullet Tools
before proceeding. Warranty is void if an unapproved product damages the machine.
For full manuals, warranty
info, accessories, & tips on
using and maintaining
your Magnum Shear,
go to BulletTools.com
or scan the QR code below.
PRT-INS-QMAG REV.B.5.15 ©Bullet Tools
Hayden, ID USA • 208-772-0175
HANDLE UNDER
EXTREME PRESSURE
DO NOT ALLOW TO
SLAM BACK!