INSTALLATION PROGRAMMING INSTRUCTIONS
OPERATOR PROGRAMMING INSTRUCTIONS
11
Programming Double Crank Time
Press and hold the brake, then press and hold Button #3 (trunk) until the parking lights flash three (3) times. Release
Button #3. Press and release Button #3, the parking lights will flash once. The Double Crank is on. Press and release Button
#3, the parking lights will flash twice, Double Crank is now off. Release the brake, the parking lights will flash three
(3) times, the programming is now entered. NOTE: Factory setting is Double Crank off.
Programming Door Lock Pulse Length
Press and hold the brake, then press and hold Button #3 (trunk) until the parking lights flash three (3) times. Release
Button #3. Press and release Button #1, the parking lights will flash once, the door lock pulse length is now 3.5 seconds.
Press and release Button #1, the parking lights will flash twice, the door lock pulse length is now .7 seconds. Release the
brake, the parking lights will flash three (3) times. The programming is now entered. NOTE: Factory Door Lock Pulse Setting
is .7 seconds.
Programming Double Pulse Unlock Output (Factory Security Shutdown)
Press and hold the brake, then press and hold Button #4 (stop) until the parking lights flash four (4) times. Release Button
#4. Press and release Button #3, the parking lights will flash once. Double Pulse Unlock is on. Press and release Button
#3, the parking lights will flash twice. Double Pulse Unlock is now programmed off. Release the brake, the parking lights
will flash three (3) times. The programming is now entered. NOTE: Factory Setting is Double Pulse off.
WE RECOMMEND THAT YOU USE FACTORY SETTINGS FIRST
ENTERING PROGRAMMING MODE
Make sure your vehicle is not running and the brake is pressed. The brake is to remain pressed as long as you want to
remain in programming mode. The unit will exit the programming mode simply by releasing the brake. The parking lights
will flash three (3) times confirming that you are out of programming mode.
Programming Tach/Tachless Start
Press and hold the brake, then press and hold Button #3 (trunk) until the parking lights flash three (3) times. Release
Button #3. Press and release Button #4, the parking lights will flash once. The unit is now in Tachless Start Mode. Press
and release Button #4, the parking lights will flash twice. The unit is now in Tach Start Mode. Release the brake, the
parking lights will flash three (3) times. The programming is now entered. NOTE: Factory setting is Tachless Start Mode.
Programming Diesel Start
Press and hold the brake, then press and hold Button #4 (stop) until the parking lights flash four (4) times. Release Button
#4. Press and release Button #1, the parking lights will flash once. The unit is now programmed for Diesel Start Mode. Press
and release Button #1, the parking lights will flash twice, Diesel Start Mode is now off. Release the brake, the parking
lights will flash three (3) times. The programming is now entered. NOTE: Factory setting is Diesel Start off.
Adding New Transmitters
Press and hold the brake, then press and hold Button #1 (start) until the parking lights flash once. Release Button
#1. Press any button on the new remote, the parking lights will flash three (3) times, the new remote is now programmed.
Programming Automatic Start Options
Press and hold the brake, then press and hold Button #2 (arm/disarm) until the parking lights flash twice. Release
Button #2. Press and release Button #1, the parking lights will flash once. You are now in 3 hour Start Mode. Your
vehicle will start every three (3) hours. Press and release Button #1 a second time. The parking lights will flash
twice for Low Voltage Start. To discontinue automatic start options, press and release Button #1 a third time. The
parking lights will flash three (3) times, the Automatic Start Option is now off. Release the brake, the parking
lights will flash three (3) times. The programming is now entered. NOTE: The factory setting is Automatic Start
Option off.
Programming Cold Start
Press and hold the brake, then press and hold Button #2 (arm/disarm) until the parking lights flash twice. Release
Button #2. Press and hold Button #2, the parking lights will flash once. Each continuous flash represents a progression
in degrees: one (1) flash=
-40ºF, two (2) flashes=-30ºF, three (3) flashes=-20ºF, four (4) flashes=-10ºF, five (5) flashes=0ºF, six (6)
flashes=10ºF, seven (7) flashes=20ºF. To disable Cold Start, press and hold Button #2 until the parking lights flash
seven (7) times, then two (2) quick flashes 8 and 9. The Cold Start is now disabled. Release the brake, the parking
lights will flash three (3) times, the programming is now entered. NOTE: The factory setting is Cold Start off.
Programming Hot Start
Press and hold the brake, then press and hold Button #2 (arm/disarm) until the parking lights flash twice. Release
Button #2. Press and hold Button #3, the parking lights will flash once. Each continuous flash represents a progression
in degrees: one (1) flash=
160ºF, two (2) flashes=150ºF, three (3) flashes=140ºF, four (4) flashes=130ºF, five (5) flashes=120ºF, six (6)
flashes=110ºF, seven (7) flashes=100ºF. To disable Hot Start, press and hold Button #3 until the parking lights
flash seven (7) times, then two (2) quick flashes 8 and 9. The Hot Start is now disabled. Release the brake, the
parking lights will flash three (3) times, the programming is now entered. NOTE: The factory setting is Hot Start
off.
NOTE: Only Cold and Hot Start functions can be enabled at the same time. If button #1 is pressed for programming,
Cold/Hot Start is disabled. When Buttons #2 and #3 are pressed, then the Automatic and Low Voltage Starts are disabled.
Programming Lock with Brake, Unlock with Ignition Off
Press and hold the brake, then press and hold Button #3 (trunk) until the parking lights flash three (3) times.
Release Button #3. Press and release Button #2, the parking lights will flash once. The unit will now lock with the
brake and unlock when the ignition is turned off. Press and release Button #2 again, the parking lights will flash
twice. The Lock with Brake feature is now turned off. Release the brake, the parking lights will flash three (3)
times. The programming is now entered. NOTE: Factory setting is Lock with Brake off.
Programming Shock Sensor On and Off (See Adjusting Shock Sensor, Page 20)
Press and hold the brake, then press and hold Button #4 (stop) until the parking lights flash four (4) times. Release
Button #4. Press and release Button #2, the parking lights will flash once the shock sensor is now ON. Press and
release Button #2, the parking lights will flash twice the shock sensor is now OFF. Release the brake, the parking
lights will flash three (3) times. The programming is now entered. NOTE: Factory setting is Shock Sensor on.
