4" Leather Front Mount Kit
User Manual
4" Leather Front Mount Kit – Part Number R400
For FX, PX, LT and USRX Model Helmets
Installation Instructions
Contents
This Bullard Leather Front Mount Kit contains:
1 Leather Front Mounting Bracket
2 Sheet Metal Screws
2 Machine Screws
2 Hex Nuts
Installation
Step 1: Locate the drill guide marks on the underside of the helmet brim (
Figure 1
).
Step 2: Drill two holes through the drill guide marks with a 3/16" drill bit.
Step 3: Attach the 4" leather front to the mount using the two machine screws to the hex nuts on the back side of the mount with a Phillips head screw driver.
Use the middle two slots for standard 4" fronts and use the top and bottom four slots for LA style fronts. Do not over tighten to prevent stripping of
screw threads.
Step 4: Attach the complete 4" front and mount to the brim of the helmet with the two sheet metal screws from the underside of the brim. Hand tighten screws
with a Phillips head screw driver to a snug fit. Do not over tighten to eliminate possible damage to the helmet shell.
©2018 Bullard. All rights reserved.
6027006179C (0618)
ISO 9001
certified
Figure 1
Front of Helmet
2”
Guide marks
w w w . b u l l a r d . c o m
Americas:
Bullard
1898 Safety Way
Cynthiana, KY 41031-9303 • USA
Toll-free within USA: 877-BULLARD (285-5273)
Tel: +1-859-234-6616
Fax: +1-859-234-8987
Europe:
Bullard GmbH
Lilienthalstrasse 12
53424 Remagen • Germany
Tel: +49-2642 999980
Fax: +49-2642 9999829
Asia-Pacific:
Bullard Asia Pacific Pte. Ltd.
LHK Building
701, Sims Drive, #04-03
Singapore 387383
Tel: +65-6745-0556
Fax: +65-6745-5176
Summary of Contents for R400
Page 1: ......
