manualshive.com logo in svg

Bull NovaScale T860 E1, User Manual, Page: 275 / 370

Share
Download
Bull NovaScale T860 E1 User Manual Download Page 275

9-53 

5.25-inch Device 

The server contains three slots in which backup devices can be installed, including optical disk drive and magnetic tape 
drive. The optical disk drive is factory-installed in the bottom slot. To install a backup device, you must purchase a 
SCSI controller separately. 

 

IMPORTANT:

   

„

 

Two single-height devices or one double-height device can be installed. 

„

 

Set the SCSI termination to OFF for the device to be installed and assign a unique SCSI 
ID not duplicated or corrupted with that of any other device. To know how to assign an 
ID, refer to the documentation coming with each of the devices. 

„

 

For a single-height device, first install a device in slot 1. Then install another device in 
slot 2. 
For a double-height device, install the device to the slots 2 and 3. 

Slot 3 

Slot 2 

Slot 1 

Summary of Contents for NovaScale T860 E1



















































































































































































































































































































































































Reviews:

No comments