Bull NovaScale R450 F2, Manual

Page: 15 / 38

Getting Started With Your System
11
3 Select the unpartitioned space again, and then press <c> to create a primary
hard-disk partition.
NOTE:
The partition will now be enumerated as C: drive.
4 Follow the on-screen instructions to create a partition. Windows will now
install on the C: drive.
For more information on assigning the Windows-bootable system partition to
the C: drive, see
http://support.microsoft.com/kb/896536 .
Other Information You May Need
WARNING:
See the safety and regulatory information that shipped with your
system. Warranty information may be included within this document or as
a separate document.
• The rack documentation included with your rack solution describes how to
install your system into a rack.
• The Hardware Owner’s Manual provides information about system features
and describes how to troubleshoot the system and install or replace system
components. This document is available online at
http://support.bull.com/documentation .
• Any media that ships with your system that provides documentation and
tools for configuring and managing your system, system management
software, system updates, and system components that you purchased with
your system.
NOTE:
Always check for updates on http://support.bull.com and read the
updates first because they often supersede information in other documents.
Obtaining Technical Assistance
If you do not understand a procedure in this guide or if the system does not
perform as expected, see
http://support.bull.com/documentation for further
documentation, or contact your support representative; the phone directory is at
http://support.bull.com .
book.book Page 11 Tuesday, December 1, 2009 3:26 PM