Bull NovaScale Blade 2320, Installation And User Manual

Page: 30 / 114

18 NovaScale Blade 2320 Installation and User’s Guide
Opening the NovaScale Blade 2320 Server Cover
The following illustration shows how to open the cover on a blade server.
To open the blade server cover, complete the following steps:
1. Read the safety information beginning on page 61 in Appendix B, “Safety
Information” and “Installation Guidelines” on page 15.
2. If the blade server is installed in a NovaScale Blade Chassis, remove it (see
“Removing the NovaScale Blade 2320 Server from a NovaScale Blade Chassis” on
page 17 for instructions).
3. Carefully lay the blade server down on a flat, non-conductive surface, with the cover
side up.
4. Press the blade-cover release on each side of the blade server and lift the cover open,
as shown in the illustration.
5. Lay the cover flat, or lift it from the blade server and store for future use.
Caution: Hazardous energy is present when the blade server is connected to the power source.
Always replace the blade cover before installing the blade server.
Blade-Cover
Release
Cover
Pins
Blade-Cover
Release
AF000436