Bull NovaScale 5 5 Series, User Manual, Page: 73 / 384

2-21
Getting Started
Preparing Server Domains for Remote Access via the Web
CAUTION:
Remote access via the Web is a potential security hazard. Customers are strongly
advised to protect their systems with up–to–date protection devices such as
virus–prevention programs and firewalls, and to maintain a detailed record of
authorized users.
Microsoft Windows Domain
1. Toggle the integrated console to the corresponding Windows domain port. See Toggling
the Local / Integrated Console Display , on page 2-8.
2. Left click
Start
→
Control Panel
→
Add or Remove Programs
.
3. Select
Add / Remove Windows Components
.
4. Click
Web Application Services
→
Details
→
Internet Information Services
→
Details
→
World Wide Web Services
→
Details
→
Remote Desktop Web
Connection . Validate where required by clicking OK or Next .
5. Insert the the Microsoft Windows CD–ROM in the CD–ROM / DVD drive.
6. The Microsoft Windows setup wizard is launched automatically and guides you through
the setup completion procedure.
7. Toggle the integrated console to the PAP unit port.
8. From the Customer Administrator PAM tree, click Configuration Tasks
→
Domains
→
Identities to open the Identities page.
9. Select the corresponding Windows domain from the list and click Edit to open the Edit
an Identity dialog.
10.Check that the Network Name , IP Address , and URL fields are completed. If not,
complete these fields with the networking data entered during the Windows setup
completion procedure and click
OK
.
Linux Domain
Virtual Network Computing (VNC) remote control software allows users to interact with the
server from a remote computer via Internet.
The server domain is ready for remote connection.
1. Toggle the integrated console to the PAP unit port.
2. From the Customer Administrator PAM tree, click Configuration Tasks
→
Domains
→
Identities to open the Identities page.
3. Select the corresponding Linux domain from the list and click Edit to open the Edit an
Identity dialog.
4. Check that the Network Name , IP Address , and URL fields are completed. If not,
complete these fields with the networking data entered during the Linux setup completion
procedure and click
OK
.