Bull Escala, Installation & Configuration Manual, Page: 22 / 36

3-4 ISA Internal Modem – Installation & Configuration Guide
How to Check the Modem Configuration
You may check the configuration by running:
# lsdev –C –t s4a –S a
If the device is not displayed, refer to ’Trouble Shooting’ on page 4-1.
De-installation of the Internal Modem Software
If you no longer need your ISA Internal Modem, you can de-install the corresponding
software by using the SMIT interface. This must be done after stopping RSF.
Logged as ’root’ user:
•
Ensure RSF is stopped:
# rsf_stat
to see whether RSF is running
# smit rsf_run
to stop RSF if needed
Refer to
RSF (Remote Service Facilities) Field Guide
for more information.
•
Run:
# smit install_remove
and select:
devices.isa.bullmodem2834I.diag
devices.isa.bullmodem2834I.rte
If you are not familiar with the AIX installation and de-installation procedures, refer to
AIX
Installation Guide
.