F
Filler plate
G
Shell
H
Drawer
I
Thumb screw
J
Cable retention bracket
c.
Slide the expansion unit
(H)
into the shell.
d.
Use a thumb screw
(I)
to install the cable retention bracket
(J)
.
e.
If you have two expansion units to install, repeat the last four steps to install the second expansion
unit.
f.
If only one expansion unit is installed in the shell, install the filler plate
(N)
in the blank slot in the
shell by sliding the filler plate up under the top tab of the shell. Gently press the filler plate into
place.
Figure 6. Removing the filler plate
Figure 7. Removing the filler plate
Installing the 57/96 and 14G/30 expansion units: Details
9
Summary of Contents for ESCALA Power7 5796 G30
