Bull Escala EL260B, Installation And User Manual

Page: 50 / 78

34
Escala Blade EL260B - Installation and User's Guide
3.9 Completing the installation
To complete the installation, you must install and close the blade server cover, install the
blade server into the Bull Blade Chassis, and turn on the blade server.
1. Install and close the blade server cover. See Installing and closing the blade server
cover on page 35.
2. Install the blade server into the Bull Blade Chassis. See Installing the blade server in a
Bull Blade Chassis on page 36.
3. Turn on the blade server, as described in Turning on the blade server on page 14.
Note:
If you have just connected the power cords of the Bull Blade Chassis to electrical outlets,
you must wait until the power-on LED on the blade server flashes slowly before you press
the power-control button.
4. If you installed an I/O expansion card, use the documentation that comes with the
expansion card to install device drivers and to perform any configuration that the
expansion card requires.
5. For certain optional devices, run the blade server SMS Utility program, as described in
Using the SMS utility on page 43.