Bull Cedoc Bull Escala 2104 TS4, Installation Manual, Page: 37 / 87

2. Align the plate to the holes.
3. Plug and slide to the left until plate is latched.
4. Go to “Setting the options”.
Setting the options
The option switch settings determine how the disk drives behave at startup.
Depending on the switch settings the disk drive motors will start up when you issue
a start motor command or through a timed delay sequence.
1. Refer to your 2104 Model TS4 configuration information for details on how to
set the options.
2. Use a small screwdriver to rotate the Box ID rotary switch (see Figure 21 on
page 10) to the ID you have chosen for this 2104 Model TS4 disk enclosure.
Figure 20. Switch cover plate
Installing and testing the 2104 Model TS4
9