18
WWW.BBTA.COM.AU
BBT-BBQ-DC
OPERATIONS
Lighting your BBQ
Lighting Instructions (Main grill burners)
1. Turn the control knobs clockwise to ‘OFF’ position.
2. Connect the regulator to the gas bottle. Turn the gas supply ‘ON’ at the cylinder. Check with the use of soapy
water for any gas leakage between the bottle and the regulator.
3. Push down the front left control knob and keep pressing whilst turning anti-clockwise to the ‘Full Rate’
position and pressing the ignition button (a clicking sound is heard), this will light the left hand burner. If
the burner does not light, repeat this process.
4. If the burner still does not light, turn the control knob to ‘OFF’ wait 5 minutes and repeat step 3.
5. When the left hand burner is lit any of the remaining burners can be lit by repeating operations 3 and 4.
Your BBQ either has 3, 4 or 5 main burners which can be used together or in any combination of burners.
6. Adjust the heat by turning the knob to the High or Low position.
7. To turn the BBQ off, turn the cylinder valve to the ‘OFF’ position and then turn all of the control knobs on
the appliance clockwise to the ‘OFF’ position.
Lighting Instructions (Side burners)
1. Turn the control knob clockwise to ‘OFF’ position.
2. Connect the regulator to the gas bottle. Turn the gas supply ‘ON’ at the cylinder. Check with the use of soapy
water for any gas leakage between the bottle and the regulator.
3. Push down the side burner control knob on the side burner shelf and keep pressing whilst turning anti-
clockwise to the ‘Full Rate’ position whilst also pressing the ignition button (a clicking sound is heard), this
will light the side burner. If the burner does not light repeat this process.
4. If the burner still does not light, turn the control knob to ‘OFF’ wait 5 minutes and repeat step 3.
5. When the side burner is lit, place the pot over the burner.
6. Adjust the heat by turning the knob to the High or Low position.
Lighting Instructions (Rear burners)
1. Read and follow all warnings and instructions in owner’s manual before lighting
2. Open Grill Hood before lighting rotisserie burner.
3. Make sure control knob is in the ‘OFF’ position
4. Push and turn the Back Burner control knob to the high position. Continue to push in control knob while
pressing electronic igniter for more than 5 seconds.
5. Once burner is lit, continue to push and hold control knob for 30 seconds.
6. If ignition does not occur in 5 seconds, turn control knob to ‘OFF’ wait 5 minutes to allow gas to dissipate
and repeat lighting procedure.
7. To turn the burner off, turn control knob clockwise until it locks in the ‘OFF’ position.
8. The back burner only has a position for ‘HIGH’ heat setting.
IMPORTANT: DO NOT USE MAIN BURNERS AND BACK BURNER AT THE SAME TIME.
• NEVER light or use the side burner with the lid in the closed position.
• NEVER attempt to light the side burner with a pot over the burner. Light the burner first, and then
place the pot over the burner.
CAUTION
