background image

© 2003, BuildMark Garage Doors

114A2725B

All Rights Reserved

Printed in Mexico

BUILDMARK™ GARAGE DOOR OPENER ONE-YEAR LIMITED WARRANTY

B

UILD

M

ARK

™ (“Seller”) warrants to the first retail purchaser of this product, for the residence in which this product is originally installed,

that it will be free from any defect in materials and/or workmanship for a period of one year from the date of purchase. Additionally,
the motor is warranted for for a period of 24 full months (2 years) from the date of purchase. The product must be used in complete
accordance with B

UILD

M

ARK

S

™ instructions for installation, operation and care. 

The proper operation of this product is dependent

on your compliance with the Owner’s Manual instructions regarding installation, operation, maintenance and testing. Failure
to comply strictly with those instructions will void this warranty in its entirety. Please note that the safety reverse system,
in order to operate properly with your garage door, must be adjusted and periodically tested in accordance with the Owner’s
Manual.

If, during the limited warranty period, it appears as though this product contains a defect which is covered by this limited warranty,

CALL OUR  TOLL FREE  SERVICE  NUMBER,  BEFORE  DISMANTLING  THIS  PRODUCT,  AT  (1-888-528-6306).

Then  send  this

product, pre-paid and insured, to our service center for warranty repair. You will be advised of shipping instructions when you call the
toll free service number. Please include a brief description of the problem and a dated proof-of-purchase receipt with any product that
is returned for warranty repair.
Products returned to Seller for warranty repair, which upon receipt by Seller are confirmed to be defective and covered by this limited
warranty, will be repaired or replaced (at Seller’s sole option) at no cost to you and returned pre-paid. Defective parts will be repaired
or replaced with new or factory-rebuilt parts at Seller’s sole option.

THIS  LIMITED  WARRANTY IS  IN  LIEU  OF  ANY OTHER  WARRANTIES,  EXPRESS  OR  IMPLIED,  INCLUDING  ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR OTHERWISE, AND OF ANY OTHER
OBLIGATIONS OR LIABILITY ON SELLER’S PART. THIS LIMITED WARRANTY DOES NOT COVER NON-DEFECT DAMAGE,
DAMAGE  CAUSED  BY IMPROPER  INSTALLATION,  OPERATION  OR  CARE  (INCLUDING,  BUT  NOT  LIMITED  TO  ABUSE,
MISUSE,  FAILURE  TO  PROVIDE  REASONABLE  AND  NECESSARY MAINTENANCE,  USE  OF  UNAUTHORIZED  PARTS  OR
ACCESSORIES,  UNAUTHORIZED  REPAIRS,  OR  ANY ALTERATIONS  TO  THIS  PRODUCT),  LABOR  CHARGES  FOR
DISMANTLING OR REINSTALLING A REPAIRED OR REPLACED UNIT, REPLACEMENT OF BATTERIES AND LIGHT BULBS,
OR UNITS INSTALLED FOR NON-RESIDENTIAL USE. REPLACED UNIT, REPLACEMENT OF BATTERIES AND LIGHT BULBS,
OR UNITS INSTALLED FOR NON-RESIDENTIAL USE. THE USE OF UNAUTHORIZED PARTS OR ACCESSORIES WILL VOID
THIS LIMITED WARRANTY. If you have any questions as to whether accessories or replacement parts are authorized, please
contact B

UILD

M

ARK

™.

THIS LIMITED WARRANTY DOES NOT COVER ANY PROBLEMS WITH, OR RELATING TO, THE GARAGE DOOR OR GARAGE
DOOR  HARDWARE,  INCLUDING  BUT  NOT  LIMITED  TO  THE  DOOR  SPRINGS,  DOOR  ROLLERS,  DOOR ALIGNMENT AND
HINGES. ANY SERVICE CALL THAT DETERMINES THE PROBLEM HAS BEEN CAUSED BY ANY OF THESE ITEMS COULD
RESULT IN A FEE TO YOU.

UNDER  NO  CIRCUMSTANCES  SHALL SELLER  BE  LIABLE  FOR  CONSEQUENTIAL,  INCIDENTAL OR  SPECIAL DAMAGES
ARISING  IN  CONNECTION  WITH  THE  USE  OF,  OR  INABILITY TO  USE,  THIS  PRODUCT.  IN  NO  EVENT  SHALL SELLER’S
LIABILITY FOR BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE OR STRICT LIABILITY EXCEED THE COST
OF  THE  PRODUCT  COVERED  HEREBY.  NO  PERSON  IS  AUTHORIZED  TO  ASSUME  FOR  US  ANY OTHER  LIABILITY IN
CONNECTION WITH THE SALE OF THIS PRODUCT.

Some  states  do  not  allow  the  exclusion  or  limitation  of  consequential,  incidental  or  special  damages,  so  the  above  limitation  or
exclusion may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.

LIMITED WARRANTY ON MOTOR - MODELS 1245BM AND 1255BM

The  motor  is  warranted  to  be  free  from  any  defect  in  materials  and/or  workmanship  for  a  period  of  24  full  months  (2  years)  from  the  date
of purchase.

BUILDMARK™ GARAGE

DOORS SERVICE IS ON CALL

OUR LARGE SERVICE ORGANIZATION

SPANS AMERICA

INSTALLATION AND SERVICE INFORMATION IS AS

NEAR AS YOUR TELEPHONE FIVE DAYS A WEEK.

SIMPLY DIAL OUR TOLL FREE NUMBER:

1-800-472-9667

HOURS:  (Central Std. Time)

7:30 A.M. TO 4:30 P.M. - Monday through Friday

For professional installation, parts and service,

contact your local BUILDMARK™ GARAGE DOORS
distributor. Look for him in the Yellow Pages, or call our
service number for a list of dealers in your area.

HOW TO ORDER

REPAIR PARTS

Selling prices will be furnished on request or parts will
be shipped at prevailing prices and you will be billed
accordingly.

WHEN ORDERING REPAIR PARTS, ALWAYS GIVE
THE FOLLOWING INFORMATION:

• PART NUMBER
• PART NAME
• MODEL NUMBER

ADDRESS ORDERS TO:

BUILDMARK™ GARAGE DOORS
Technical Support Group
6020 S. Country Club Road
Tucson, Arizona 85706

SERVICE INFORMATION TOLL FREE NUMBER:

1-888-528-6306

Summary of Contents for 1245BM





































Reviews: