Hub
Product Manual
| 3
Troubleshooting
Step 3: Complete the Installation
1. Once all devices are Included, reconnect the
Hub to the network router with the Ethernet
cable and plug in power supply to the Hub.
2. Log into you User Account and navigate to
your dashboard.
For help, please view our online tutorials at
www.building36.com/videos
Excluding Z-Wave Devices
(removing them from the network)
To exclude Z-Wave devices, each device must be
within direct communication range of the Hub. For
best results, we recommend having Hub in the
same room as the device you are Excluding.
1. Press and hold the Pairing button ( ) for 5
seconds until the light flashes Orange to put the
Hub in Exclusion mode.
While you’re holding
the Pairing button, the light will be flashing
Green before it turns Orange.
2. Follow the Z-Wave device’s instructions to put
the device into Exclusion mode.
Most devices
have an Include/Exclude button.
3. The flashing Orange light will turn solid
to indicate the device has been successfully
excluded.
Unsuccessful Installation
If the Z-Wave device does not add successfully,
follow the device removal procedure and then try
the Inclusion process again.
Summary of Contents for H200BRA
Page 1: ...ADC T2000 User Guide Hub Product Manual ...
Page 2: ......
