Next, simply select “Tool” from the sidebar on the web (or local) interface to open the
“Tool Configuration” page.
With “Tool Configuration” page open, make the following configuration changes:
1.
Select “PWM Spindle” in the “tool-type” field.
2.
Leave “tool-reversed” unchecked.
3.
Set “max-spin” to 255.
4.
Set “min-spin” to 0.
5.
Leave “tool-enable-mode” and “tool-direction-mode” disabled.
6.
Leave “pwm-inverted” unchecked.
7.
Set “pwm-min-duty” to 0.
8.
Set “pwm-max-duty” to 100.
9.
Set “pwm-freq” to 1000.
The click the green “Save” button to save the changes.
