Buick Verano Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
9085356) - 2016 - crc - 10/19/15
164
Infotainment System
Dial or Call :
The dial or call
command can be used
interchangeably to dial a phone
number or a stored name tag.
Digit Dial :
This command allows a
phone number to be dialed by
entering the digits one at a time.
Redial :
This command is used to
dial the last number used on the cell
phone.
Using the
“
Dial
”
or
“
Call
”
Command
1. Press
b
/
g
. The system
responds
“
Ready,
”
followed by
a tone.
2. Say
“
Dial
”
or
“
Call.
”
3. Say the entire number without
pausing or say the name tag.
Once connected, the person called
will be heard through the audio
speakers.
Using the
“
Digit Dial
”
Command
The digit dial command allows a
phone number to be dialed by
entering the digits one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone.
If an unwanted number is
recognized by the system, say
“
Clear
”
at any time to clear the last
number.
To hear all of the numbers
recognized by the system, say
“
Verify
”
at any time.
1. Press
b
/
g
. The system
responds
“
Ready,
”
followed by
a tone.
2. Say
“
Digit Dial.
”
3. Say each digit, one at a time,
that you want to dial. After
each digit is entered, the
system repeats back the digit it
heard followed by a tone. After
the last digit has been entered,
say
“
Dial.
”
Once connected, the person called
will be heard through the audio
speakers.
Using the
“
Redial
”
Command
1. Press
b
/
g
. The system
responds
“
Ready,
”
followed by
a tone.
2. After the tone, say
“
Redial.
”
The system dials the last
number called from the
connected cell phone.
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
.
Press
b
/
g
to answer the call.
.
Press
$
/
i
to ignore a call.
Call Waiting
Call waiting must be supported on
the cell phone and enabled by the
wireless service carrier.
.
Press
b
/
g
to answer an
incoming call when another call
is active. The original call is
placed on hold.